Location: Home > Garage & Shop > Lube Equipment back
EM276 Automotive Injector Tester 4 Pluse Modes Powerful Fuel System Scan Tool
EM276 Automotive Injector Tester 4 Pluse Modes Powerful Fuel System Scan Tool
Click to enlarge
Brand KOLSOL
Manufacturer KOLSOL

Buy New: $35.95
as of 2018-02-22 07:05:00

Eligible for Free Shipping
1 In Stock
EM276 Injector Tester Specification:

Power Supply:12V vehicle battery
Operation Environment:0-40°C,relative humidity<80%
Storage Environment:-10°C ~50°C, relative humidity<85%
Test Cable Length: 41.5cm/ 16.3 inches
Product Size:147x82x29mm

Operation Instruction:

1.Turn off the vehicle's engine.
2. Connect the black clip to the negative terminal of the vehicle battery, connect the red clip to the positive terminal of the battery.
3.Locate the fuel injector which you want to test, then remove the electrical cable from this injector and connect the tester's two pulse output terminals to the electrical connector of this injector.
4.Press the MODE SET key to select the desired pulse mode, the display shows the current pulse mode.

Explanations for the 4 Modes:

Mode1: the tester will output 1 pulse, whose pulse width is about 250ms.
Mode 2: the tester will output 50 pulses, every pulse's pulse width is about 7ms.
Mode 3: the tester will output 100 pulses, every pulse's pulse width is about 3.5ms.
Mode 4: the tester will output continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms.
At any time, you can press the PULSE key again to stop outputting pluse.

5. After you have selected the desired pulse mode, press the PULSE key.

The tester outputs pulse(s) to the injector under test, the pulse signal indicator will light as indication.
Brand KOLSOL
EAN 0889327022304
Feature Large LED display with 4 Pulse Modes, the continuous mode (mode 4) helps identify good or bad injector. Test Lead 41.5cm / 16.3 inches,The tester can help diagnose injector problems,you can use it to test each injector individually to help idently stuck,leaking or burnt-out conditions,Works with engine off and pulse timer may be used with fuel pressure gauge,The mode lock feature ensures test condition uniformity.,EM276 Injector Tester can works with any fuel pressure tester. Please NOTE: Gasoline car only, NOT the diesel engine
Label KOLSOL
Manufacturer KOLSOL
MPN EM276
ProductGroup Automotive Parts and Accessories
Publisher KOLSOL
Studio KOLSOL
Title EM276 Automotive Injector Tester 4 Pluse Modes Powerful Fuel System Scan Tool
UPC 889327022304
. .

 

© 2016 Automotive Parts